The Active FCB-EV-HD-SDI is a complete interface solution to to take full advantage of the high definition digital video provided by the FCB-EV block cameras. The module connects directly to the camera’s digital output port to give superior image quality.
This interface module supports all the HD-SDI modes of the camera. (For 3G-SDI support, please contact Active Silicon for latest product portfolio.). Supported cameras include the FCB-EV7500/7310/7300/5500/5300.
A DIP switch located on the rear of the module allows the HD video mode to be conveniently selected without the need to send serial commands to the camera. RS-232 communications port and the reset line are available. The Active FCB-EV-HD-SDI also has a built in test pattern which conforms to the SMPTE RP-219-2002 specification.
The product is supplied as a kit consisting of the interface module, mounting kit and cables, and for volume OEMs the board alone may also be ordered without the mounting kit and cables if required.
The physical outline of the Active FCB-EV-HD-SDI sits within the rear profile of the FCB-EV series of cameras and the supplied mounting kit allows the module to be securely and neatly attached to the camera.