Click image to enlarge
Harrier 30x AF-Zoom USB/HDMI Camera (Sony FCB-EV7520/EV7520A)
Part Number: AS-CIB-USBHDMI-002-7520-A | AS-CIB-USBHDMI-002-7520A-A
- USB 3.1 Gen1 and HDMI camera solution for the Sony FCB-EV7520/EV7520A.
- Simultaneous display on both video outputs.
- 30x optical zoom, 12x digital zoom.
- 1/2.8”-type Exmor R CMOS progressive scan image sensor.
- STARVIS back-illuminated pixel technology.
- Supports all HD modes up to 1080p60.
- Camera control using VISCA™ protocol over TTL/RS-232/RS-485 serial or USB 3.1 (UVC) port.
- Video output mode selected by DIP switches, UVC or VISCA control (over serial or USB connection).
- Power supply over USB capability.
-
Description
-
Product Specs
-
Downloads
-
Ordering Info
Description
Products Specs
Downloads
Ordering Info
The Sony FCB-EV7520 and -EV7520A cameras are now end-of-life. Please contact sales for remaining stock and alternative products. We recommend the Harrier 30x AF-Zoom USB/HDMI Camera (Sony FCB-EV9520L) as their improved successor.
The Harrier 30x AF-Zoom USB/HDMI Camera (Sony FCB-EV7520 or -EV7520A) offers 30x optical zoom and 12x digital zoom with simultaneous display of both HDMI and USB Video Class (UVC) v 1.1 output. The video output is SMPTE 274M and SMPTE 296M compliant and all HD modes up to 1080p60 are supported.
On this USB block camera the USB Video output is enabled when the interface board is connected to a SuperSpeed USB 3.x host. The HDMI output is enabled when an HDMI cable is connected. On power up, the camera video mode may be selected by DIP switch settings on the board. Camera video modes, along with other functions, may also be controlled by sending VISCA commands over RS-485/RS-232/TTL or over the Harrier Virtual COM port, or using UVC commands. The USB interface serves as (UVC) video output, USB based control input port and optional power supply. An example UVC video application is available with the Harrier USB SDK. Source code and Visual studio projects for C++/CLI, C#, and VB are available on request from Active Silicon.
Based on the Sony block camera FCB-EV7520 or FCB-EV7520A, with a back-illuminated CMOS sensor, the camera guarantees high-quality imaging even in low-light conditions. It builds upon the market leading specifications of Sony’s world-renowned FCB Series features including Advanced Noise Reduction, Auto ICR, Spherical Privacy Zone Masking and Wide Dynamic Range, which makes this camera solution suitable for a variety of demanding applications.
Active Silicon also offers camera solutions with 3G-SDI/HD-SDI/HD-VLC™ video output, Ethernet IP and HDMI or USB only output. For more information contact our team.
Related Products
Camera Features
Image sensor |
1/2.8”-type Exmor R CMOS sensor |
Number of effective pixels |
2130K |
Output pixels (H x V) |
1920 x 1080, 1280 x 720 |
Video format |
1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25 |
Minimum illumination (50%, High Sensitivity mode ON) |
ICR-Off mode: 0.01lx (shutter speed 1/30 sec), 0.0013lx (1/4 sec or 1/3 sec) |
Minimum illumination (50%, High Sensitivity mode OFF) |
ICR-Off mode: 0.1lx (shutter speed 1/30 sec), 0.013lx (1/4 sec or 1/3 sec) |
Recommended illumination |
100lx to 100,000lx |
Gain |
Auto / manual (0dB to 50.0dB, 0 to 28 steps) |
Shutter speed |
1/1 sec to 1/10,000 sec, 22 steps |
Sync system |
Internal |
Exposure compensation |
0dB to ± 10.5dB, 15 steps |
Backlight compensation |
Yes |
Gamma |
Standard / straight |
Aperture control |
16 steps |
White balance |
Auto, ATW, indoor, outdoor, one push WB, manual WB, outdoor auto, sodium vapor lamp (Fix / auto / outdoor auto) |
AE (Auto exposure mode) |
Full auto, manual, priority mode (shutter / iris), EV compensation, spot exposure, slow AE |
Lens (wide to tele) |
30x optical zoom f=4.3mm to 129mm, F1.6 to F4.7 |
Zoom mode |
Standard mode / variable mode / direct mode |
Digital zoom |
12x (max 360x with optical zoom) |
Zoom movement speed - optical wide to optical tele |
5.0 sec (focus tracking ON), 2.5 sec (focus tracking OFF) [FCB-EV7520A] |
Zoom movement speed - optical wide to digital 12x tele |
7.0 sec (29.97p / 59.94p), 7.4 sec (25p / 50p) [FCB-EV7520A] |
Zoom movement speed - digital wide to digital 12x tele |
2.1 sec (29.97p / 59.94p), 2.5 sec (25p / 50p) [FCB-EV7520A] |
Focusing system |
Auto focus (normal AF, interval AF, zoom trigger AF [sensitivity: normal, low]) |
Horizontal viewing angle (1080p / 1080i mode) (wide to tele) |
63.7° (Wide) to 2.3° (Tele) |
Horizontal viewing angle (720p mode) (wide to tele) |
63.7° (Wide) to 2.3° (Tele) |
Minimum object distance |
10mm (Wide) to 1200mm (Tele) |
Camera Functions
Auto ICR |
Yes |
Wide-D |
Yes |
Visibility enhancer |
Yes |
Defog |
Yes (low / mid / high) |
Noise reduction |
Yes (3D + 2D / independent setting (3D, 2D) |
Image stabilization |
Yes |
StableZoom |
Yes |
Flicker reduction |
Yes (FCB-EV7520A only). |
Spot light avoidance |
Yes (FCB-EV7520A only). |
Digital output |
Yes |
Motion detection |
Yes |
Spherical privacy zone masking |
Yes |
Alarm |
Yes |
Slow AE response |
Yes |
Picture effects |
Black & white (monochrome image) |
Picture freeze |
Yes |
Electronic flip (e-flip) |
Yes |
Mirror image |
Yes |
Slow shutter |
Yes |
Temperature readout |
Yes |
Title display |
Yes (20 characters / line, max. 11 lines) |
Camera mode display |
Yes (English) |
Connector Specifications
KEL30 Connector (J1) |
The interface board is fitted with a 30-way miniature connector to link to the matching connector on the camera. Connector type: KEL USL00-30L Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length). |
Input/Output Connector (J2) |
The interface board is fitted with an industry standard 4-way connector for VSync signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. |
Power and Control Connector (J3) |
The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. |
JTAG Connector (J4): |
Test connector used in manufacturing for circuit verification. |
HDMI Output Connector (J5) |
The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. |
USB 3.1 Connector (J6) |
This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. The connector also provides a UVC control port for camera control (optional). It can also provide power to the camera or board if the USB connection has a high enough current/power rating. Connector type: USB Type C (5 Gbps) Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.) |
Video and Control Mode DIP Switch (SW1) |
The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up, and VISCA camera control communication modes. See Harrier USB/HDMI Camera Interface Board datasheet for the configuration of the DIP switch elements. |
VISCA Control |
The VISCA serial signal is routed through the interface board and to the camera. However, this serial signal is also connected to the camera interface board; extended VISCA commands (not used by the camera) may be used to control the interface board. VISCA coammands can also be send via the Harrier Virtual COM port. For information on interface board operation using extended VISCA serial commands, refer to the Harrier USB/HDMI Camera Interface Board datasheet. |
Status LED |
The interface board is fitted with a multi-color LED to indicate camera status. |
Physical and Environmental Details
Power requirements |
8V to 12V DC from J3, or 5V from J6 (USB) |
Power consumption |
4.8W – Typical power with static view at 1080p60 and USB/HDMI outputs enabled, values will vary with camera mode and camera focus/zoom motor operations. |
Operating temperature |
0°C to +60°C (ambient environment). |
Storage temperature |
-20°C to +60°C |
Relative humidity |
20% to 80% non-condensing (operating and storage) |
Dimensions (L x W x H) |
114 x 50.0 x 62.0mm |
Weight |
ca. 282g |
Interface
USB/UVC |
The SuperSpeed USB video port (USB Type C, J6) can be used to stream/acquire image data in parallel with the HDMI display output. The video mode of the UVC stream is the same as the output of the camera. To change the mode of the UVC stream the mode of the camera should be changed using VISCA serial commands, UVC control or DIP switch settings (and power cycling). Video modes up to 1080p60 are supported. Compliant with SuperSpeed USB 3.1 (UVC). |
HDMI |
HDMI output is enabled when an HDMI cable is plugged in. The video mode of the HDMI output is the same as the output of the camera. To change the mode of the HDMI output the mode of the camera should be changed using VISCA serial commands or DIP switch settings (and power cycling). Video modes up to 1080p60 are supported. Compliant with HDMI specification v.1.4a. |
Camera control interface |
VISCA protocol (CMOS 5V level) |
HarrierControl camera software |
The HarrierControl camera software can also be used to configure the custom camera support on the Harrier USB/HDMI Camera Interface Board over the USB connection. |
Ordering Information
| Part number | Description |
|---|---|
|
AS-CIB-USBHDMI-002-7520-A |
Harrier 30x AF-Zoom USB/HDMI Camera (Sony FCB-EV7520); includes 100mm 30-way micro-coax cable AS-CIB-USL30-100MM, 50mm available upon request. |
|
AS-CIB-USBHDMI-002-7520A-A |
Harrier 30x AF-Zoom USB/HDMI Camera (Sony FCB-EV7520A); includes 100mm 30-way micro-coax cable AS-CIB-USL30-100MM, 50mm available upon request. |
|
AS-CIB-USBHDMI-001-EVAL-A |
Evaluation Kit for Harrier USB/HDMI, including the Harrier 30x AF-Zoom USB/HDMI Camera (Sony FCB-EV7520A). The kit contains power supply, board cables (AS-CIB-CBLKIT-003-A), micro-coax cable (AS-CIB-USL30-100MM, for connecting camera with camera interface board) and the Harrier Evaluation Board with PC serial interface (via USB UART). Not included: Camera and camera interface board. |
|
AS-SONY-FCB-EV7520 |
Sony FCB-EV7520 autofocus zoom camera. |
|
AS-SONY-FCB-EV7520A |
Sony FCB-EV7520A autofocus zoom camera. |
|
AS-CIB-USBHDMI-002-A |
Harrier USB/HDMI Camera Interface Board for autofocus-zoom block cameras; provides simultaneous USB 3 video (UVC) and HDMI video output. Board only, no cables included. |
|
AS-CIB-CBLKIT-003-A |
Cable kit for AS-CIB-USBHDMI-002-A containing cables for J2, J3, and J4 that connect to the Harrier Evaluation Board. |
|
AS-CIB-USL30-100MM |
30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 100mm (Manufacturer: KEL, part number: USL20-30SS-010-C). |
|
AS-CIB-USL30-50MM |
30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 50mm (Manufacturer: KEL, part number: USL20-30SS-005-C). |
|
AS-CIB-BRK-007-A |
Metal bracket, screws and spacers for mounting Harrier camera interface boards to the Sony FCB-EV7520A camera. |