Cameras

Harrier 10x AF-Zoom HDMI Camera

Part Number: AS-CIB-HDMI-001-10LHD-A
Product Image Harrier 10x AF-Zoom Camera with HDMI video output

Features

  • Full HD high resolution autofocus-zoom camera with HDMI output.
  • 10x Optical Zoom & 32x Digital Zoom.
  • 1/2.8-type 2MP Sony IMX462LQR-C STARVIS CMOS sensor.
  • Supports 1080p – 60/50/30 fps, 720p – 60/50/30 fps.
  • Effective number of pixels approx. 2,130,000.
  • Shutter speed 1/30(25) – 1/30,000 sec.
  • TTL Serial VISCA, Pelco – D/P Control Protocol.
  • Video output mode selected by DIP switches or VISCA control.

The Harrier 10x AF-Zoom HDMI Camera is a compact, low-power camera option that offers Full HD real-time HDMI video output.

This HDMI block camera is fitted with a 2MP Sony STARVIS CMOS sensor, offers 10x optical zoom (32x digital zoom), measures only  62.4 x 55 x 45.5mm (L x W x H) and weighs 152g. The up to 1080p60 Full HD video output is SMPTE 274M and SMPTE 296M compliant.

The HDMI output is enabled when an HDMI cable is connected. On power-up, the camera video mode may be selected by the DIP switch settings on the board. Camera video modes, along with other camera and interface board functions, may also be controlled by TTL serial communication.

Special camera features include Real-time True Wide Dynamic Range (WDR), Day & Night mode – Infrared Cut filter Removal (ICR), Digital Noise Reduction (2D + 3D DNR) and Digital Image Stabilization.

Active Silicon also offers Harrier 10x AF-Zoom Camera solutions with simultaneous USB/HDMI video output or USB only, as well as 3G-SDI/HD-SDI/HD-VLC™ video output. For more information contact our team.

Camera Specification

Image sensor

1/2.8″ Sony IMX462LQR-C CMOS sensor (progressive scan) [issue02 camera]

Effective no. of pixels

Approx. 2,130,000 pixels

Video format (HD)

1080p/60, 1080p/30, 720p/60 720p/30

Video format (SD)

NTSC / PAL

Minimum illumination

Color (1/30s, 60dB): 0.003 lux; Color DSS (1/8s, 60dB): 0.00075 lux;

BW (1/30s, 60dB): 0.0004lux; BW DSS (1/8s, 60dB): 0.0001 lux;

[values for AS-CAM-10SHD-A issue02]

S/N ratio

More than 50dB

Gain control (AGC)

OFF/ON

Shutter speed

1/30(25) – 1/30,000 sec

Sync system

Internal

Aperture control

20steps

DSS

Off / 2x / 4x / (8x:60 or 50 fps only)

[DSS = Digital Slow Shutter]

White balance

Auto, One Push, Manual, Indoor, Outdoor

AE (Auto exposure mode)

Auto, lris Priority, Shutter Priority, Manual

Lens (wide to tele)

10x optical zoom f= 5.1mm to 51mm F1.6 to 1.8

Digital zoom

OFF / MAX 2x – 32x

Focusing system

Auto, one push, manual

Horizontal viewing angle (wide to tele)

57° to 6.2°

Minimum object distance (wide to tele)

100mm to 1000mm

Horizontal resolution

700 TV lines

Control protocol

Serial VISCA / TTL

Pelco-D / Pelco-P

Baud rate

2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200

Camera Functions

Day & Night mode

Infrared Cut filter Removal (ICR). Auto / Day / Night / Ext-in.

Wide Dynamic Range (WDR)

real-time. OFF / WDR / BLC.

Digital Noise Reduction

2D+3D DNR. OFF / Low / Middle / High / Auto

Digital Image Stabilization

Available.

High/Back Light Compensation (HLC/BLC)

OFF / ON / Night only.

Defog

Available.

Motion detection

Detection OFF / 3 regions.

Privacy mask

Mask OFF / 24 masks.

Defect detection

Available, ON/OFF.

Mirror

Off, H, V, H&V.

Connector Specification - camera interface board

KEL30 Connector (J1)

The interface board is fitted with a 30-way miniature connector to link to the video output connector on the camera.

Connector type: KEL USL00-30L.

Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length).

Input/Output Connector (J2)

The interface board is fitted with an industry standard 4-way connector for VSync/PWM signal output and test pattern/reset control inputs.

Connector type: JST SM04B-SRSS-TB

Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information tab).

See Harrier HDMI Camera Interface Board datasheet (download tab) for pin assignments and control options.

Power and Control Connector (J3)

The interface board is fitted with an industry standard 10-way connector for power and serial control.

Connector type: JST SM10B-SRSS-TB

Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information tab).

See Harrier HDMI Camera Interface Board datasheet (download tab) for pin assignment and output options.

JTAG Connector (J4):

Test connector used in manufacturing for circuit verification.

HDMI Output Connector (J5)

The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected.

Connector type: HDMI Type D (micro).

Mating Connector: Standard micro HDMI cable.

Video and Control Mode DIP Switch (SW1)

The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up. Switches 5-8 are reserved for future use. See datasheet for the configuration of the DIP switch elements.

General

Power requirement

9 – 15V DC.

Power consumption

Approx. 4W (typical@1080p60).

Operating temperature

0°C to +50°C.

Storage temperature

-20°C to +60°C.

Operating humidity

10% to 90% (no condensation)

Dimensions (L x W x H)

62.4mm x 56mm x 45.5mm (L x W x H).

Weight

136g.

Part number Description
AS-CIB-HDMI-001-10LHD-A

Harrier 10x AF-Zoom HDMI Camera; includes 100mm 30-way micro-coax cable AS-CIB-USL30-100MM, 50mm available upon request.

AS-CIB-USBHDMI-001-EVAL-A

Evaluation Kit for Harrier USB/HDMI to evaluate AS-CIB-HDMI-001-A and AS-CIB-USBHDMI-002-A. Includes power supply, board cables (AS-CIB-CBLKIT-003-A), micro-coax cable (AS-CIB-USL30-100MM, for connecting camera with camera interface board) and the Harrier Evaluation Board with PC serial interface (via USB UART). Not included: Camera and camera interface board.

AS-CAM-10LHD-A

Harrier 10x AF-Zoom Camera.

AS-CIB-HDMI-001-A

Harrier HDMI Camera Interface Board for autofocus-zoom block cameras. Board only, no cables included.

AS-CIB-CBLKIT-003-A

Cable kit for AS-CIB-HDMI-001-A containing cables for J2 and J3 that connect to the Harrier Evaluation Board.

AS-CIB-USL30-100MM

30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 100mm (Manufacturer: KEL, part number: USL20-30SS-010-C).

AS-CIB-USL30-50MM

30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 50mm (Manufacturer: KEL, part number: USL20-30SS-005-C).

AS-CIB-BRK-009-A

Metal bracket, screws and spacers for mounting the AS-CIB-HDMI-001-A to a Harrier 10x AF-Zoom Camera.

 

Harrier AF-Zoom cameras

Watch this video to learn more about Harrier AF-Zoom cameras:

Related Products

View Product Camera Interface Boards
Product image - Harrier HDMI camera interface board

Harrier HDMI Camera Interface Board

View Product
View Product Accessories & Cables
Photo of content and case of the evaluation kit for Harrier USB/HDMI

Evaluation Kit for Harrier USB/HDMI

View Product
View Product Software
Logo HarrierControl plus block cameras

HarrierControl Camera Software

View Product
View Product Cameras
Product photo - Active Silicon's Harrier 10x zoom camera

Harrier 10x AF-Zoom Camera

View Product