The Harrier 36x Autofocus-Zoom (AF-Zoom) Camera with USB/HDMI output offers simultaneous display of both HDMI and USB Video Class (UVC) v1.1 output with full HD image output at 1920 x 1080p (30 fps). The video output is SMPTE 274M and SMPTE 296M compliant.
The camera has a Sony Global Shutter CMOS sensor and a powerful 36x optical zoom lens (32x digital zoom). The global shutter sensor allows the capture of moving objects without the distortion which can occur with rolling shutters.
When the board is connected to a SuperSpeed USB 3.x host, the USB video output is enabled. The HDMI output is enabled when an HDMI cable is connected. On power up, the camera video mode may be selected by DIP switch settings on the board. Camera video modes, along with other functions, may also be controlled by sending VISCA commands over RS-485/RS-232/TTL or over the Harrier Virtual COM port, or using UVC commands. The USB interface serves as (UVC) video output, USB based control input port, and optional power supply. An example UVC video application with the Harrier USB SDK (application source code and Visual studio projects for C++/CLI, C#, and VB available on request from Active Silicon).
Special features of this USB/HDMI global shutter block camera include Digital Image Stabilization, Noise Reduction, Privacy Mask Function, Intelligent Motion Detection, Day & Night mode (Infrared Cut filter Removal, ICR) and High/Back Light Compensation (HLC/BLC).
1080p50 & 1080p60 support is available on request for volume OEMs.
Active Silicon also offers camera solutions with 3G-SDI/HD-SDI/HD-VLC™ video output and HDMI or USB only output. For more information contact our team.
| Image sensor | 1/2.3-type Sony Pregius IMX392LQR-C CMOS sensor (global shutter) |
||||||||||||
| Effective no. of pixels | Approx. 2,350,000 pixels |
||||||||||||
| Video format (HD) | UVC 1.1 and HDMI 1.4: 1080p/30/25 fps, 720p/60/50/30/25 fps |
||||||||||||
| Analog resolution | CVBS |
||||||||||||
| Minimum illumination | Color(1/30s, 48dB) : 0.3 lux , Color DSS(1/2s, 48dB) : 0.06 lux |
||||||||||||
| S/N ratio | more than 50dB (AGC off) |
||||||||||||
| Gain control (AGC) | 0 – 10 steps |
||||||||||||
| Shutter speed | 1/30(25) – 1/20,000 sec |
||||||||||||
| Sync system | Internal |
||||||||||||
| DSS | Off / 2x / 4x / 8x / 16x / 32x (/64x : 60 or 50fps mode only) |
||||||||||||
| White balance | Auto, One Push, Manual, Indoor, Outdoor |
||||||||||||
| AE (Auto exposure mode) | Auto, lris Priority, Shutter Priority, Manual |
||||||||||||
| Lens (wide to tele) | Optical x36 Zoom, f=6mm to 216mm, F1.5 (wide) to F4.8 (tele) |
||||||||||||
| Digital zoom | OFF / MAX 1x – 32x |
||||||||||||
| Focusing system | Auto / One Push / Manual |
||||||||||||
| Viewing angle (FOV) |
|
||||||||||||
| Minimum object distance (wide to tele) | 100mm (wide) to 1500mm (tele) |
||||||||||||
| Control protocol | Serial VISCA (RS-485/RS-232/TTL/USB (via the Harrier Serial COM port). |
||||||||||||
| Baud rate | 9600 / 19200 / 38400 / 115200 |
| Day & Night mode | Day / Night |
| Digital Noise Reduction | OFF / Low / Middle / High / Auto |
| Digital Image Stabilization | Available |
| High/Back Light Compensation (HLC/BLC) | Off / BLC / HLC |
| Defog | Available |
| Motion detection | Detection OFF / 3 positions |
| Privacy mask | Mask OFF / 8 positions |
| Defect detection | Detection ON/OFF |
| KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the video output connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length). |
| Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for VSync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet (download tab) for pin assignments and control options. |
| Power and Control Connector (J3) | The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet (download tab) for pin assignment and output options. |
| HDMI Output Connector (J5) | The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. |
| USB 3.0 Connector (J6) | This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. The connector also provides a UVC control port for camera control (optional). It can also provide power to the camera or board if the USB connection has a high enough current/power rating. Connector type: USB Type C (5 Gbps) Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.) |
| Video and Control Mode DIP Switch (SW1) | The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up, and VISCA camera control communication modes. See Harrier USB/HDMI Camera Interface Board datasheet (download tab) for the configuration of the DIP switch elements. |
| Power requirement | 9 – 15V DC |
| Power consumption | 8.4W (typical) |
| Operating temperature | 0°C to +50°C |
| Storage temperature | -20°C to +60°C |
| Operating humidity | 0% to 90% (no condensation) |
| Dimensions (L x W x H) | 137 x 55.6 x 65.5mm |
| Weight | approx. 454g |
| Part number | Description |
|---|---|
| AS-CIB-USBHDMI-002-36LGHD-A |
Harrier 36x AF-Zoom USB/HDMI Camera; includes 100mm 30-way micro-coax cable AS-CIB-USL30-100MM, 50mm available upon request. |
| AS-CIB-USBHDMI-001-EVAL-A |
Evaluation Kit for Harrier USB/HDMI, including the Harrier 36x AF-Zoom USB/HDMI Camera. The kit contains power supply, cabling (including AS-CIB-CBLKIT-003-A), 30-way micro-coax cable (AS-CIB-USL30-100MM, for connecting camera with camera interface board) and the Harrier Evaluation Board with PC serial interface (via USB UART). Not included: Camera and camera interface board. |
| AS-CAM-36LGHD-A |
Harrier 36x AF-Zoom Camera with global shutter sensor. |
| AS-CIB-USBHDMI-002-A |
Harrier USB/HDMI Camera Interface Board for autofocus-zoom block cameras; provides simultaneous USB 3 video (UVC) and HDMI video output. Board only, no cables included. |
| AS-CIB-CBLKIT-003-A |
Cable kit for AS-CIB-USBHDMI-002-A containing cables for J2 and J3 that connect to the Harrier Evaluation Board. |
| AS-CIB-USL30-100MM |
30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 100mm (Manufacturer: KEL, part number: USL20-30SS-010-C). |
| AS-CIB-USL30-50MM |
30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 50mm (Manufacturer: KEL, part number: USL20-30SS-005-C). |
| AS-CIB-BRK-007-A |
Metal bracket, screws and spacers for mounting the AS-CIB-USBHDMI-002-A to a Harrier 36x AF-Zoom Camera. |
Active Silicon offers a range of block cameras that provide image transmission and capture in a variety of outputs including 3G-SDI/HD-SDI, USB3, HDMI, and Ethernet H.264 IP. Watch this video to learn more about Harrier AF-Zoom cameras.
