Harrier AF-Zoom cameras
Watch this video to learn more about Harrier AF-Zoom cameras:
The Harrier 36x AF-Zoom HDMI Camera output features a powerful 36x optical zoom / 32x digital zoom. The HDMI video output is SMPTE 274M and SMPTE 296M compliant and all HD modes up to 1080p30 are supported. The global shutter CMOS image of this HDMI block camera sensor guarantees the capture of moving objects without the distortion that can occur with rolling shutters.
The HDMI output is enabled when an HDMI cable is connected. On power-up, the camera video mode may be selected by the DIP switch settings on the board. Camera video modes, along with other camera and interface board functions, may also be controlled by TTL serial communication.
Special features of the HDMI autofocus-zoom camera include Digital Image Stabilization, Noise Reduction, Privacy Mask Function, Intelligent Motion Detection, Day & Night mode (Infrared Cut filter Removal, ICR) and High/Back Light Compensation (HLC/BLC).
The Harrier 36x AF-Zoom Camera is also available with USB/HDMI or HD-SDI video output.
For more information contact our team.
Image sensor | 1/2.3-type Sony Pregius IMX392LQR-C CMOS sensor (global shutter) |
||||||||||||
Effective no. of pixels | Approx. 2,350,000 pixels |
||||||||||||
Video format (HD) | UVC 1.1 and HDMI 1.4: 1080p/30/25 fps, 720p/60/50/30/25 fps |
||||||||||||
Analog resolution | CVBS |
||||||||||||
Minimum illumination | Color(1/30s, 48dB) : 0.3 lux , Color DSS(1/2s, 48dB) : 0.06 lux |
||||||||||||
S/N ratio | more than 50dB (AGC off) |
||||||||||||
Gain control (AGC) | 0 – 10 steps |
||||||||||||
Shutter speed | 1/30(25) – 1/20,000 sec |
||||||||||||
Sync system | Internal |
||||||||||||
DSS | Off / 2x / 4x / 8x / 16x / 32x (/64x : 60 or 50fps mode only) |
||||||||||||
White balance | Auto, One Push, Manual, Indoor, Outdoor |
||||||||||||
AE (Auto exposure mode) | Auto, lris Priority, Shutter Priority, Manual |
||||||||||||
Lens (wide to tele) | Optical x36 Zoom, f=6mm to 216mm, F1.5 (wide) to F4.8 (tele) |
||||||||||||
Digital zoom | OFF / MAX 1x – 32x |
||||||||||||
Focusing system | Auto / One Push / Manual |
||||||||||||
Viewing angle (FOV) |
|
||||||||||||
Minimum object distance (wide to tele) | 100mm (wide) to 1500mm (tele) |
||||||||||||
Control protocol | Serial VISCA over TTL. |
||||||||||||
Baud rate | 9600 / 19200 / 38400 / 115200 |
Day & Night mode | Day / Night |
Digital Noise Reduction | OFF / Low / Middle / High / Auto |
Digital Image Stabilization | Available |
High/Back Light Compensation (HLC/BLC) | Off / BLC / HLC |
Defog | Available |
Motion detection | Detection OFF / 3 positions |
Privacy mask | Mask OFF / 8 positions |
Defect detection | Detection ON/OFF |
KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the matching connector on the camera. Connector type: KEL USL00-30L. Mating cable: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length) 30-way micro coaxial cable. This cable can be supplied with the interface board (see ordering information). Other lengths also available (subject to minimum order quantities). |
Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for Vsync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: Suitable cable can be purchased as part of a cable kit (see order information tab). See datasheet (download tab) for pin assignments and control options. |
Power and Control Connector (J3) | The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: Suitable cable can be purchased as part of a cable kit (see order information tab). See datasheet (download tab) for pin assignment and output options. |
JTAG Connector (J4): | Test connector used in manufacturing for circuit verification. |
HDMI Output Connector (J5) | The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. |
Video Mode DIP Switch (SW1) | The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up. Switches 5-8 are reserved for future use. See datasheet (download tab) for the configuration of the DIP switch elements. |
Power requirement | 9 – 15V DC |
Power consumption | 7.6W (typical) |
Operating temperature | 0°C to +50°C |
Storage temperature | -20°C to +60°C |
Operating humidity | 0% to 90% (no condensation) |
Dimensions (L x W x H) | 137 x 55.6 x 65.5mm |
Weight | 452g |
Download | File Type | File Size | |
---|---|---|---|
Datasheets |
Datasheet Harrier HDMI Camera Interface Board | 702.90 KB | |
Datasheet Harrier 36x AF-Zoom Camera | 322.08 KB | ||
Manuals & Quick Start Guides |
Technical Reference Manual - Harrier 36x AF-Zoom Camera v1.07 | 4.95 MB | |
Harrier HDMI CIB Quickstart Guide - v1.6.2 | 814.58 KB | ||
Software |
HarrierControl Camera Software v.1.4.2 | zip | 15.21 MB |
CAD Drawings & Data |
3D CAD Model (zipped STEP file) - Harrier 36x AF-Zoom HDMI Camera | zip | 5.50 MB |
Mechanical Overview - Harrier 36x AF-Zoom HDMI Camera | 166.34 KB | ||
Other Downloads |
Technical Note - Troubleshooting guide for Harrier camera interface boards | 276.68 KB | |
Brochure - Cameras for drones, UAVs and gimbals | 2.84 MB |
Part number | Description |
---|---|
AS-CIB-HDMI-001-36LGHD-A |
Harrier 36x AF-Zoom HDMI Camera |
AS-CIB-USBHDMI-001-EVAL-A |
Evaluation Kit for Harrier USB/HDMI, including the Harrier 36x AF-Zoom HDMI Camera. The kit contains power supply, board cables (AS-CIB-CBLKIT-003-A), 30-way micro-coax cable (AS-CIB-USL30-100MM, for connecting camera with camera interface board) and the Harrier Evaluation Board with PC serial interface (via USB UART). Not included: Camera and camera interface board. |
AS-CAM-36LGHD-A |
Harrier 36x AF-Zoom Camera with global shutter sensor. |
AS-CIB-HDMI-001-A |
Harrier HDMI Camera Interface Board for autofocus-zoom block cameras. Board only, no cables included. |
AS-CIB-CBLKIT-003-A |
Cable kit for AS-CIB-HDMI-001-A containing cables for J2 and J3 that connect to the Harrier Evaluation Board. |
AS-CIB-USL30-100MM |
30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 100mm (Manufacturer: KEL, part number: USL20-30SS-010-C). |
AS-CIB-USL30-50MM |
30-way micro-coax cable for connecting the interface board (J1) to the camera. Length 50mm (Manufacturer: KEL, part number: USL20-30SS-005-C). |
AS-CIB-BRK-007-A |
Metal bracket, screws and spacers for mounting the AS-CIB-HDMI-001-A to a Harrier 36x AF-Zoom Camera. |
Watch this video to learn more about Harrier AF-Zoom cameras: